Delta Rockwell
Saturday, June 19th, 2010Delta Rockwell
The Intrepid Sea-Air-Space Museum
Glancing into New York's East River at the U.S.S. Intrepid's slender bow which progressively arched, almost triumphantly, many stories above to support the flat steel deck from which take offs of considerably gross weighted aircraft had been routinely conducted, I could not refrain from awing at the dual sea-air technological conquest man had made since Eugene Ely had first taken to the air from the U.S.S. Birmingham in a Curtiss biplane in 1910. The Royal Naval Air Service had commissioned the world's first aircraft carrier, the HMS Furor, in 1917, and the US subsequently commissioned its own first carrier, the Langley, in 1922, albeit converted from a collier. The versatility of the combined ocean-air technology provided a self-contained, moveable world, which traversed sea and extended aircraft range. Complementing each other, the aircraft then provided advanced surveillance for the carrier. Collectively, they had played an indispensable role in aviation and space history. These accomplishments could only be told by the individual designs which had operated from it.
The Grumman F6F-5 Hellcat, for instance--powered by a single 2,000-hp Pratt and Whitney R-2800-10 piston engine with a three-bladed propeller and featuring a 380-mph maximum speed--had been the most successful carrier-based fighter during World War II and had won the Naval Air War in the Pacific. Grumman had produced some 12,275 of the foldable-wing designs, which successfully downed 5,216 enemy aircraft as opposed to only 270 losses of its own.
The Curtiss SB2C-3 Helldiver, a carrier-based Scout bomber with a 16,607-pound gross weight, a 1,110-mile range, and a 295-mph speed, had been the US Navy's frontline WWII dive bomber and had first reported aboard the Intrepid in September of 1943 during shake-down trials.
Another design familiar to the aircraft carrier during the war had been the Grumman TBF/TBM Avenger. Operationally introduced in June of 1942, the 17,895-pound, foldable-wing aircraft became the US Navy's standard torpedo bomber. The 9,836 built featured 1,000-mile range capabilities and 276-mph maximum speeds.
Some propeller designs bridged the gap between World War II and the pure-jet fighters of the 1950s. The Grumman HU-16 Albatross, for example--a high-wing, dual-engined aircraft built according to Naval requirements by Grumman Aerospace for air-sea rescue missions—featured two 1,425-hp Wright R-1820-76BA radials and a 35,700-pound gross weight. Succeeding several earlier Grumman-designed amphibians, the Albatross had first flown in prototype form on October 24, 1947. Operated by a crew of four to six, the HU-16 typically carried ten stretcher cases and cruised at 150 mph. Of the 71 eventually operated by the US Coast Guard, the last had not been removed from service until 1982.
Rotorcraft had also played an important role in air-sea operations. The 15,000-pound Boeing Vertol H-21C Shawnee, powered by a 1,425-hp Wright Cyclone R-1820-103 and able to lift a 5,000-pound payload, had been instrumental in providing mobility in road infrastructure-poor and geographically-obstructed Vietnam. By mid-1962, five companies of Shawnees had been distributed into the country's four military regions. The 22-troop, 120-mph rotorcraft had provided the basis for the succeeding 44-troop Chinook.
The predominantly straight-winged designs of the 1940s had been remolded into the delta-winged fighters of the 1950s. The Grumman F11F-1 Tiger, operated by the VF-33 Squadron from the Intrepid during 1959, was the first carrier-borne single-seat fighter with supersonic capability and the first design to employ the NACA-developed "area rule" from inception.
Another innovative design had been the McDonnell F-3B Demon—the first Navy jet comparable in all respects to its land-based contemporaries. Tracing its origins to the earlier F-4 Phantom and ordered in 1949, the swept-wing fighter had conducted its inaugural flight on August 7, 1951. But because of the unsuitability of its original powerplants, the 33,900-pound aircraft did not enter service until 1956, now powered by a single 14,250-thrust-pound Allison J71-A-2E.
The 80,000-pound, foldable-wing Rockwell International RA-5C Vigilante, powered by two 17,000-thrust-pound General Electric J-79-GE-8s, was a Mach 2.1 high-performance, all-weather, strategic attack carrier-born design. First flown on August 31, 1958, it introduced several innovations, including variable-geometry air intakes, a linear bomb bay, blown flaps for low-speed handling, and an all-moving, differential tailplane. Its design obviated the need for traditional ailerons.
Equally innovative, yet providing the vertical take off capability of the Shawnee and the swept, fixed wings of the Vigilante, was the Hawker Siddeley AV-8C Harrier which was operated by the Marine Corps as a Close Support fighter and bomber. Rotating the four exhaust nozzles of its 21,500-thrust-pound Rolls Royce Pegasus F402 vectored-thrust turbofans, it was able to achieve both vertical- and short-take off and landing (V/STOL) capability, thus generating vertical and horizontal lift, yet attain forward speeds of 737 mph. Because of this maneuverability, the type was instrumental in the Gulf War, operating from the ships at sea and forward land bases in Saudi Arabia and enabling it to hit key Iraqi frontlines.
The U.S.S. Intrepid had eventually even been instrumental in the space program. Succeeding the initial single-person Mercury missions and bridging the gap to the Apollo moon missions, the two-man Gemini program had been launched on March 23, 1965 with a five-hour orbit piloted by Gus Grissom and John Young. The Intrepid conducted the recovery of the first splashdown, raising the capsule to its hangar deck level. The ten manned Gemini missions, conducted over a 20-month period, would demonstrate man's ability to function in space for extended time periods and facilitate rendezvous and docking procedures which would pave the way toward the Apollo moon landings.
Instrumental in both peace and war—in benevolence and destruction—the U.S.S. Intrepid—and the numerous other aircraft carriers of its type—had provided the sea-shielding foundation from which to protect and explore--regardless of the technological height its fixed- and rotor-wing aircraft had attained. Upon return, it was the landmass they called "home."
About the Author
Any connections with NYC highschool shop class tools?
NYC supposedly got rid of shop classes in its school system. I was wondering how late I am in searching for an old
Delta Rockwell Table Saw. If anyone has info on where these schools tools went could you let me know ,thanks
Unused, past their prime, and obsolete items belonging to governmental agencies and school districts are usually sold at public auctions. You might want to contact the school district office to see if that was/is the case in this instance. Maybe you will be lucky, and the auction has not been held as of yet.
In any event, auctions are a great place to buy shop tools. It seems as though every estate auction has a table saw for sale. I once bought a two year old commercial grade table saw for only $75.00 at an estate sale. Keep an eye on the auction listings in your local newspaper. Also keep in mind that most auctioneers maintain websites and feature listings and pictures of the contents of upcoming auctions on them. Viewing listings and photos can save you a lot of driving and leg work when looking for a particular piece of equipment.
Good luck with your search for a tablesaw.
Rockwell Delta Table Saw 8" Blade 1/2 HP Electric Motor
 |
 VINTAGE DELTA ROCKWELL 4" JOINTER / PLANER  US $99.99
|
 Delta Rockwell 14" Band Saw Aluminum Table Insert US $8.99
|
 Delta Rockwell 14" Band Saw Wheel Cover Bolts US $7.99
|
 Delta Rockwell 14" Band Saw Wheel Cover knob US $9.99
|
 Delta Rockwell 4" Jointer Table Elevation Handle Assem US $19.99
|
 Rockwell Delta Unisaw Motor Dust Cover and Door New US $119.00
|
 DELTA ROCKWELL Flared Leg Stand Caster Set US $68.98
|
 DELTA ROCKWELL Flared Leg Stand Caster Set US $20.01
|
 DELTA ROCKWELL Flared Leg Stand Wear Feet US $9.99
|
 DELTA ROCKWELL Lot of Machinery Tags US $26.00
|
 DELTA ROCKWELL 24" SCROLLSAW SCROLL SAW Lot of Parts US $9.99
|
 DELTA ROCKWELL FAUCET Knobs Bandsaw Scrollsaw etc. US $12.56
|
 Rockwell Delta 6" Jointer, 37-220, Single Phase 115V US $650.00
|
 Rockwell Delta 31-710 Sander Machine Manual with parts US $4.99
|
 Rockwell Delta 31-710 Sander Machine Misc. Parts BS-211 US $9.99
|
 DELTA ROCKWELL 14" BAND SAW RISER EXTENSION KIT US $59.99
|
 Delta Rockwell Outboard Floor Stand US $67.99
|
 Delta Rockwell Offset Toolrest Holder US $134.99
|
 Delta Rockwell Unisaw Rear Tilt Trunnion Bracket US $30.99
|
 delta Rockwell 24" Twin Post Toolrest #3 US $79.99
|
 Delta Rockwell Right Angle Toolrest #2 US $37.99
|
 Delta Rockwell 24" scroll saw stand US $9.99
|
 Delta Rockwell vintage 1/2 hp shaper motor US $24.99
|
 Delta Rockwell wood lathe tool rest US $9.99
|
 Delta Rockwell wood lathe banjo,clamp and wrench US $9.99
|
 ROCKWELL DELTA 480-8623 "BABY" UNISAW "JUNIOR" 8" SAW US $595.95
|
 ROCKWELL DELTA 6" PROFESSIONAL JOINTER US $150.00
|
 Delta Rockwell Contractors Saw Cast Iron Table Top US $59.95
|
 Delta/Rockwell 12"-14" Tilting Arbor Table Saw 34-350 US $102.50
|
 DELTA ROCKWELL 12" DISC SANDER TABLE CLAMPS US $7.50
|
 DELTA ROCKWELL 14" BAND SAW TABLE TRUNNION W/ LOWER US $59.99
|
 DELTA ROCKWELL 14" BAND SAW UPPER GUIDE US $12.50
|
 DELTA ROCKWELL 14" BAND SAW WHEEL COVER KNOBS US $17.50
|
 DELTA ROCKWELL 14" WOOD METAL CUTTING BAND SAW SHAFT US $24.95
|
 DELTA ROCKWELL WALKER TURNER 20" DRILL PRESS RACK US $19.99
|
 NOS Delta Rockwell Unisaw Gray Steel Motor Cover NEW US $59.95
|
 NOS Delta Rockwell Scroll Saw Plunger Tube and parts US $31.00
|
 ROCKWELL DELTA Model# 15-655 15" Drill Press 3 Phase US $99.99
|
 DELTA ROCKWELL 14" WOOD METAL BAND SAW BELT GUARD US $69.99
|
 DELTA ROCKWELL 14" WOOD METAL BAND SAW GEARBOX GEAR US $179.99
|
 Delta Rockwell 4" jointer or 10" band saw stand US $9.99
|
 Delta Rockwell 24" scroll saw "j" bolts US $9.99
|
 Delta Rockwell 17-600 rear head casting US $4.99
|
 DELTA ROCKWELL INDUSTRIAL WOOD SHAPER PLATE LSP-18 US $9.99
|
 Rockwell / Delta 3-Lip Shaper Cutter 1/2" Bore # 9-248 US $20.00
|
 NEW Delta/Rockwell Spindle Sander Sanding 3" Drum US $14.95
|
 Vintage Rockwell Delta Machine Lamp Light US $99.99
|
 2 HP DELTA ROCKWELL 10" UNISAW TABLE SAW NO. 34-450 US $102.50
|
 Delta Rockwell Unisaw Trunnions and Yoke US $65.00
|
 Delta Rockwell Unisaw Cast Iron Top US $60.00
|
 Rockwell Delta Milwaukee lathe 4-1/8" LH faceplate US $9.99
|
 Rockwell Delta Milwaukee lathe 4" tool rest 1" shaft US $14.99
|
 Rockwell Delta 12 x 36 Variable Speed Wood Lathe US $445.00
|
 DELTA-ROCKWELL 2 Speed Heavy Duty Shaper Parts Manual US $17.50
|
 ROCKWELL/Delta 24 inch Scroll/Jig Saw Op/Part Manual US $12.50
|
 DELTA / ROCKWELL DRILL PRESS QUILL ADJUSTER AND HAND US $15.00
|
 Rockwell Delta Milwaukee lathe wheel arbor 1"x 8tpi US $15.50
|
 Rockwell Delta Milwaukee lathe screw center w/drawbar US $15.50
|
 Rockwell Delta Milwaukee lathe 2mt cup center US $9.50
|
 DELTA ROCKWELL 900 RADIAL ARM SAW US $275.00
|
 DELTA/ROCKWELL RE-35 PANEL SCORING SLIDING TABLE SAW US $2,999.00
|
 Rockwell Delta Wood Lathe US $400.00
|
 Delta Rockwell 6" Carbide Tipped Dado Set New In Box US $7.00
|
 Delta Rockwell Slo-Speed Drill Press Pulley US $69.95
|
 VGT ROCKWELL? DELTA? LATHE,SAW LIGHT LAMP MACHINE AGE US $9.99
|
 T1 HSS JOINTER KNIVES DELTA CRAFTSMAN ROCKWELL 6 INCH US $18.99
|
| Powered by phpBay Pro |
...bought a new one from dealer, jacked up car and removed tires. I couldn't get the steering gear bolts x2 to loosen from the subframe in order to safely lower the subframe to gain access to remove the gaskets and clamp that secure the sway bar to the frame, so i tried to wiggle the sway bar through rediculously thinking it would go ...now it's stuck, i still can't remove the bolts that attach the steering gear which means i'm stuck in my driveway with no further resolution. Does anyone have a magic trick to either get the nuts off the steering gear (i've tried penetrating spray, a torch) or another way to install this darn swaybar ?
