Router Linear Bearing
Sunday, June 13th, 2010Router Linear Bearing
1.Filling lubricating oil to linear guide
As we know, the smoke and dust which is generated by the engraving and cutting will harm the guide rail after a period of usage, so we need to do the daily maintenance of the guide rail. Please turn off the laser engraving machine and cut the power, clean the guide rail with clean mull, then please drop the lubricating oil on the guide rail, try to move the slide rod and make sure that the oil comes into it. Make the slide rod move on the guide rail after filling the oil, now we need to install the guide rail firstly, please do not fix the guide rail firstly, install the screws in the right position and keep the slide ray on the even level. Then fix the belt and slide rod well, install the lens and then adjust the destination of X light.
2.Clean the reflector and focusing mirror
After a period of usage of the laser engraving and laser Cutting Machine, the smoke and dust will adhere to the surface of the reflector and mirror, which will affect the engraving and cutting depth and also will affect the engraving and cutting precision. We need to clean the three reflectors and one focusing mirror with pure alcohol weekly.
3.Oil-filling for the bearing
A laser engraving machine is equipped with lots of bearings, in order to keep the good engraving and cutting result, part of bearings need to be refilled with oil regularly (except the oil-retaining bearing). Wipe off the surface dust on the bearing with the clean mull, take a piece of injector and suck some engine oil inside, then fill the bearing with pinhead and move the bearing at the same time.
4.Adjustment of synchronous belt
There are some synchronous belts on one laser engraving machines, if the synchronous belt is too loose which will result in the double images of the engraved words, if the synchronous belt is too tight which will result in the abrasion of synchronous belt. After a period of usage, please adjust the taut screws of synchronous belt, adjust the synchronous belt until its degree of tightness is suitable, it is adequate when there is no double images of the engraved words and the noise of the laser engraving and laser cutting machine is very low, or you can consult our technician.
5.Maintenance of the laser tube
The laser tube of the laser engraving machine is using the cycle water as cooling system and as the time goes on, there will be some furings inside the laser tube. We we can put a little vinegar into the cycle water, the vinegar will melt the furing. After that, we shall use some clean water to clean the tube. So the laser tube will be in the best working condition and its life will become longer.
York Laser is a China leader in the manufacture of professional laser engraving equipment.We have a long range of engraving product series, including laser engravers, laser cutters, cnc engravers and vinyl cutters.
Cherub1 - MDL Router - Adjustable trapezoidal Nuts
 |
 New SBR20UU 20mm Linear Ball Bearing Block Router  US $.99
|
 SC20UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SC12UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SBR16UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SC20UU Linear Ball Bearing CNC Router XYZ Table New US $.99
|
 SCS16UU Linear Ball Bearing XYZ Table CNC Router New US $.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.99
|
 3/8"inch V Groove CNC Router Linear Guide Ball Bearings US $5.50
|
 SCS16UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SBR12UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SCS16UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SBR16UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.01
|
 SBR16UU Linear Ball Bearing CNC Router XYZ Table New US $.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 SC20UU Linear Ball Bearing XYZ Table CNC Router/ Slide US $.99
|
 IKO LWL15BCS LINEAR BEARING/LM GUIDE/CNC ROUTER/ L698mm US $129.99
|
 REXROTH Linear rails & bearings L300mm cnc router thk US $99.95
|
 REXROTH Linear rails & bearings L775mm cnc router thk US $229.95
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.01
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.01
|
 LM16 x 8 pc linear ball bearing XYZ table CNC router US $41.00
|
 THK SR15 LINEAR BEARING /LM GUIDE /CNC ROUTER / L440mm US $109.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.01
|
 REXROTH Linear rails & bearings L1076mm cnc router THK US $229.95
|
 THK HSR20 Linear bearings & rails L1130 cnc nsk router US $229.95
|
 THK HSR20 Linear bearings & rails L1130 cnc nsk router US $229.95
|
 THK SSR25 Linear rails & bearings L1240mm cnc router US $299.95
|
 4pcs SC30UU Linear Ball Bearing XYZ Table CNC Router US $79.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $.99
|
 12mm U Groove Slide/Linear CNC Router Ball Bearings US $21.95
|
 LMF12 x 4 pc linear ball bearing XYZ table CNC router US $25.50
|
 4pcs SC16UU 16mm linear ball bearing Block CNC Router US $26.99
|
 CNC Router Mill Plasma Linear Dual Open Bearing 20mm US $29.00
|
 4x SC20UU linear Ball Bearing XYZ Table CNC Router New US $37.99
|
 LM20 x 8 pc linear ball bearing XYZ table CNC router US $54.00
|
 SC20UU x 4 pc linear ball bearing XYZ table CNC router US $62.00
|
 SC16UU x 4 pc linear ball bearing XYZ table CNC router US $54.00
|
 SC12UU x 4 pc linear ball bearing XYZ table CNC router US $49.00
|
 LM12 x 8 pc linear ball bearing XYZ table CNC router US $36.00
|
 LMC16 x 4 pc linear ball bearing XYZ table CNC router US $49.90
|
 LMC20 x 4 pc linear ball bearing XYZ table CNC router US $53.00
|
 LMC25 x 4 pc linear ball bearing XYZ table CNC router US $73.00
|
 IKO LWES25 LINEAR BEARING /LM GUIDE/CNC ROUTER/ L1270mm US $369.99
|
 3/8" V Groove CNC Router Linear Guide Bearings Sealed US $7.77
|
 THK HSR20A LINEAR BEARING /LM GUIDE /CNC ROUTER/ L878mm US $279.99
|
 THK HSR20 Linear bearings & rails L840mm cnc nsk router US $249.95
|
 3/8"inch V Groove CNC Router Linear Guide Way Bearings US $7.77
|
 2x IKO LWL9B Linear Bearing Slide Rail for CNC Router US $89.99
|
 20mm CNC Router Linear Bearing Truck Open Slide Unit US $41.94
|
 15mm V Groove Slide/Linear CNC Router Ball Bearings US $27.45
|
 12mm U Groove Slide/Linear CNC Router Ball Bearings US $16.45
|
 15mm V Groove Slide/Linear CNC Router Ball Bearings US $27.45
|
 4pcs SC8UU 8mm linear ball bearing XYZ table CNC router US $26.69
|
 NSK LS15 LINEAR BEARING / LM GUIDE/ CNC ROUTER/ L1065mm US $209.99
|
 STAR LINEAR BEARING/LM GUIDE/9mm wide /ROUTER/ L410mm US $139.99
|
 4 Linear Motion Ball Bushings 12mm Bearings CNC Router US $34.95
|
 CNC Router Linear SW8-OP 1/2"inch Ball Bushing/Bearing US $23.94
|
 4pcs SC20UU Linear Ball Bearing XYZ Table CNC Router US $33.99
|
 THK SSR20 Linear rails & bearings L340mm cnc router #2 US $129.95
|
 BALLSCREW,THK RSR15 LINEAR BEARING , ACTUATOR, ROUTER US $249.99
|
 SC10UU Linear Ball Bearing XYZ Table CNC Router New US $7.79
|
 THK LINEAR BEARING /HSR30HR/LM GUIDE/CNC ROUTER/ L760mm US $249.99
|
 2pcs SC50LUU Linear Ball Bearing XYZ Table CNC Router US $249.99
|
 4x SBR12UU 12mm CNC Router Linear Ball Bearing Block US $37.99
|
 New SBR12UU 12mm CNC Router Linear Ball Bearing Block US $9.50
|
| Powered by phpBay Pro |
